Exchange Server 2007: Description of Update Rollup 6 for Hosted Messaging and Collaboration 4.5

SUPPORT SOLUTION:
Microsoft has released an update that is dated December 2009. This update fixes issues in the following components in Microsoft Solution for Hosted Messaging and Collaboration 4.5. Exchange 2007 Resource Manager NamespaceExchange 2007 Resource Manager Web ServicesHosted Email 2007 NamespaceHosted Email 2007 Web ServicesManaged Email 2007 NamespaceManaged Email 2007 Web ServicesExchange 2007 Mobility ProviderExchange 2007 ProviderUnified Messaging 2007 Provider Additionally, this update also includes native 64-bit versions of the following components: Exchange 2007 Mobility Provider This article describes the following items about the update rollup:The issues that the update rollup fixes.The prerequisites for installing the update rollup.Whether you must restart the computer after you install the update rollup.Whether the update rollup is replaced by any other update rollup.Whether you must make any registry changes. The files that the update rollup contains. .Issues that the update rollup fixes
2, ‘idea’);
This update rollup fixes the following issues that were not previously documented in a Microsoft Knowledge Base article:When a folder is created, the value of folder allocation is not consistent with StorageQuota calculation result.When a public folder is created by using the “-StorageQuota” and “-postStorageQuota”, the operation fail.This is because the two parameters was replaced by the parameters “–IssueWarningQuota” and “–ProhibitPostQuota” in the Exchange SP2.An overflow exception occurs when allocating 2Terra bytes or above mailbox space to an organization. This is because the maximum mailbox space that can be allocated to an organization lower than 2Terra bytes. If an organization allocated a “not shared” mailstore, it cannot reallocate on the same mailstore.This update rollup includes the following fixes that were released:977174  

(http://support.microsoft.com/kb/977174/
)
Description of Update Rollup 5 for Hosted Messaging and Collaboration 4.5

976864 

(http://support.microsoft.com/kb/976864/
)
Mails may be sent to unintended mail recipients in Hosted Messaging and Collaboration 4.5

.Update rollup information
3,
A
supported hotfix is available from Microsoft. However, this hotfix is intended
to correct only the problem that is described in this article. Apply this
hotfix only to systems that are experiencing this specific problem.
If the hotfix is available for download, there is a “Hotfix download available”
section at the top of this Knowledge Base article. If this section does not
appear, submit a request to Microsoft Customer Service and Support to obtain
the hotfix. Note If additional issues occur or if any troubleshooting is required,
you might have to create a separate service request. The usual support costs
will apply to additional support questions and issues that do not qualify for
this specific hotfix. For a complete list of Microsoft Customer Service and
Support telephone numbers or to create a separate service request, visit the
following Microsoft Web site: http://support.microsoft.com/contactus/?ws=support
(http://support.microsoft.com/contactus/?ws=support)
Note The “Hotfix download available” form displays the languages for
which the hotfix is available. If you do not see your language, it is because a
hotfix is not available for that language.
Prerequisites
3,
Hosted Messaging and Collaboration version 4.5 must be installed before you apply this update.The logon user should be a member of the Domain Admins Group.The HMC Deployment Tool must be installed on the first Microsoft Provisioning Server (MPS) Engine server.Microsoft Exchange Server 2007 Service Pack 2 must be installed before you apply this update.Restart requirement
3,
You do not have to restart the computer after you apply this update rollup. But you have to restart the Provisioning Engine on each MPS server, restart Internet Information Services (IIS) on each Web Services server, and restart the Exchange Transport service on all Exchange Hub Transport servers.Hotfix replacement information
3,
This rollup replaces the previously released RU1, RU2, RU3, RU4 and RU5. File information
3,
The English version of this hotfix has the file
attributes (or later file attributes) that are listed in the following table.
The dates and times for these files are listed in Coordinated Universal Time
(UTC). When you view the file information, it is converted to local time. To
find the difference between UTC and local time, use the Time
Zone tab in the Date and Time item in Control Panel.
Collapse this tableExpand this tableFile nameFile versionFile sizeDateTimePlatformRpchttpconfigtool.msiNot Applicable412,67202-Dec-200917:21Not ApplicableAdcollector.msiNot Applicable419,32802-Dec-200917:21Not ApplicablePwdb40ssis.msiNot Applicable273,40802-Dec-200917:21Not ApplicableCategorizeroverrideagent-x64.msiNot Applicable373,76002-Dec-200917:21Not ApplicableCategorizeroverrideagent.msiNot Applicable373,76002-Dec-200917:21Not ApplicableCheckfoldergroupsandrmbyplan.msiNot Applicable384,51202-Dec-200917:21Not ApplicableKb959196.msiNot Applicable756,22402-Dec-200917:21Not ApplicableSmtpdomaincachetask-x64.msiNot Applicable369,66402-Dec-200917:21Not ApplicableExchange2007oabresourcemanagerns.msiNot Applicable253,95202-Dec-200917:21Not ApplicableExchange2007resourcemanagerns.msiNot Applicable308,73602-Dec-200917:21Not ApplicableHostedactivedirectoryns.msiNot Applicable264,19202-Dec-200917:21Not ApplicableHostedemail2007ns.msiNot Applicable349,18402-Dec-200917:21Not ApplicableHostedsharepoint2007ns.msiNot Applicable260,60802-Dec-200917:21Not ApplicableManagedadns.msiNot Applicable285,69602-Dec-200917:21Not ApplicableManagedemail2007ns.msiNot Applicable315,90402-Dec-200917:21Not ApplicableManagedunifiedmessaging2007ns.msiNot Applicable247,80802-Dec-200917:21Not ApplicableActivedirectoryprovider.msiNot Applicable364,03202-Dec-200917:21Not ApplicableBlockrmoprovider.msiNot Applicable270,84802-Dec-200917:21Not ApplicableCorermoprovider.msiNot Applicable360,44802-Dec-200917:21Not ApplicableExchange2007mobilityprovider.msiNot Applicable364,03202-Dec-200917:21Not ApplicableExchange2007provider.msiNot Applicable537,60002-Dec-200917:21Not ApplicableFilesystemprovider.msiNot Applicable395,26402-Dec-200917:21Not ApplicableUnifiedmessaging2007provider.msiNot Applicable251,39202-Dec-200917:21Not ApplicableDnsclient.msiNot Applicable682,49602-Dec-200917:21Not ApplicableDnsprovider.msiNot Applicable357,37602-Dec-200917:21Not ApplicableResourcemanagedatabase.msiNot Applicable790,52802-Dec-200917:21Not ApplicableExchange2007oabresourcemanagerws.msiNot Applicable445,44002-Dec-200917:21Not ApplicableExchange2007resourcemanagerws.msiNot Applicable467,96802-Dec-200917:21Not ApplicableHostedactivedirectoryws.msiNot Applicable475,64802-Dec-200917:21Not ApplicableHostedemail2007ws.msiNot Applicable530,43202-Dec-200917:21Not ApplicableHostedsharepoint2007ws.msiNot Applicable476,67202-Dec-200917:21Not ApplicableManagedactivedirectoryws.msiNot Applicable472,06402-Dec-200917:21Not ApplicableManagedemail2007ws.msiNot Applicable524,80002-Dec-200917:21Not ApplicableInstallation information
3,
To deploy the hotfix follw these Deployment steps:
Disable and shut down the provisioning engine on all MPS engine servers (MPS0n).Log on to the first MPS server (MPS01) as a member of the Domain Admins Group. Start the MPS Deployment Tool, and then uninstall the following components. Exchange 2007 Resource Manager NamespaceExchange 2007 Resource Manager Web ServiceHosted Email 2007 NamespaceHosted Email 2007 Web ServiceManaged Email 2007 NamespaceManaged Email 2007 Web ServiceExchange 2007 Mobility ProviderExchange 2007 ProviderUnified Messaging 2007 ProviderIf you have not previously installed Update Rollup 5, you must also uninstall the following components:Active Directory ProviderBlockRMO ProviderCoreRMO ProviderFile System ProviderDNS ProviderExchange 2007 OAB Resource Manager NamespaceExchange 2007 OAB Resource Manager Web ServiceHosted Active Directory NamespaceHosted Active Directory Web ServiceManaged Unified Messaging 2007 NamespaceManaged AD NamespaceManaged Active Directory Web ServiceHosted SharePoint 2007 Web ServiceHosted SharePoint 2007 NamespaceExchange 2007 Mobility ProviderExtract the QFE Rollup pack on the MPS server to a temporary location. For example, extract it to the following location:C:\temp\QFERollupPackage After backing up the existing files, copy the following MSI files from the C:\temp\QFERollupPackage folder to the C:\MSIShare\ folder: Exchange2007ResourceManagerNS.msiExchange2007ResourceManagerWS.msiHostedEmail2007NS.msiHostedEmail2007WS.msiManagedEmail2007NS.msiManagedEmail2007WS.msiExchange2007MobilityProvider.msiExchange2007Provider.msiUnifiedMessaging2007Provider.msiIf you have not previously installed Update Rollup 5, you must also backup and replace the following files:ActiveDirectoryProvider.msiBlockRMOProvider.msiCoreRMOProvider.msiFileSystemProvider.msiDNSProvider.msiExchange2007OabResourceManagerNS.msiExchange2007OabResourceManagerWS.msiHostedActiveDirectoryNS.msiHostedActiveDirectoryWS.msiManagedUnifiedMessaging2007NS.msiUnifiedMessaging2007Provider.msiManagedADNS.msiManagedActiveDirectoryWS.msiHostedSharePoint2007WS.msiHostedSharePoint2007NS.msiExchange2007MobilityProvider.msiUse the Deployment Tool to reinstall these components on the MPS Engine Server. Restart the Provisioning Engine on each MPS server. To do this, follow these steps:On the MPS Engine servers, start Component Services.Expand Component Services, expand Computers, and then expand My Computer.Click COM+ Applications.Right-click Provisioning Engine, click Enable, and then click Start.In the Deployment Tool, expand Hosted Exchange, expand Exchange Provisioning Configuration, right-click the following nodes, and then execute the Initialize commands:Hosted Active DirectoryManaged Email 2007Exchange 2007 OAB Resource ManagerHosted Email 2007Exchange 2007 Resource ManagerHosted SharePointClick Start Deployment.On each Web Services server, restart Internet Information Services (IIS).Important If you have previously installed Update Rollup 5, your installation of Upgrade Rollup 6 is now finished. If you have not previously installed Update Rollup 5, you must also complete steps 11 through 17.Log on to PROV01 as the Domain Administrator, and then follow these steps:Back up any files that you have customized in the following folder:%Program Files%\Microsoft Hosting\Provisioning\RPCHTTPConfigUse Add or Remove Programs to remove the RPCHttpConfigTool, and then install the version from the update.Reapply your customizations.Follow the instructions in the “Deploy the RPC over HTTP Client Configuration Web Site” section in the RTM HMC 4.5 Deployment guide to install the RPCHttpConfigTool.msi component. For more information about how to deploy the RPC over the HTTP Client Configuration Web site, visit the following Microsoft Web site:How to deploy the RPC over the HTTP Client Configuration Web site
(http://technet.microsoft.com/en-us/library/cc501357.aspx)
On OMSQL01, copy the Pwdb40ssis.msi file from the update, and then run it two times to remove the earlier version and to install the new one.Follow the instructions in the “Create the Performance Warehouse Database” section of the RTM HMC 4.5 Deployment guide to install the pwdb40ssis.msi component. For more information about how to create the Performance Warehouse Database, visit the following Microsoft Web site:How to create the Performance Warehouse Database
(http://technet.microsoft.com/en-us/library/cc501397.aspx)
Run the DNSClient.msi from the update two times to remove the earlier version and to install the new one. Follow the instructions in the “Deploy the MPS DNS Client” section in the RTM HMC 4.5 Deployment guide to install the DNSClient.msi component. For more information about how to deploy the MPS DNS Client, visit the following Microsoft Web site:How to deploy the MPS DNS Client,
(http://technet.microsoft.com/en-us/library/cc501405.aspx)
Install and then configure the Out of Office (OOF) agent that includes the following two utilities: Categorizer Override Agent: This is a transport agent that overrides the categorizer behavior on the Hub Transport servers.SMTP Domain Cache Task: This is a scheduled task that generates cache files so that the categorizer override agent can filter the OOF messages.Note To support multi-tenant capable Out of Office functionality for tenants among different organizations within the same domain, you must install the OOF agent on all Exchange Hub Transport servers. The Exchange Transport service must be restarted for the installation of Categorizer Override Agent.For more information about how to install and configure the OOF agent, visit the following Microsoft Web site: How to install and configure the OOF agent
(http://technet.microsoft.com/en-us/library/cc545931.aspx)
To remove the existing CategorizerOverrideAgent, follow these steps: On EXHUB01, open the CategorizerOverrideAgent.dll.config file from the CategorizerOverrideAgent directory, and note the Cache Refresh Time. Note By default, the CategorizerOverrideAgent.dll.config file is located in the following folder: C:\Program Files\Microsoft\Exchange Server\TransportRoles\Agents\CategorizerOverrideAgentRun the following command to uninstall the performance counters and event sender: %WINDIR%\Microsoft.NET\Framework\v2.0.50727\InstallUtil.exe CategorizerOverrideAgent.dllOpen the Exchange Management Shell, and then disable and uninstall the TransportAgent. In Add or Remove Programs, remove the CategorizerOverrideAgent. Open regedit, and then remove the “Categorizer Override Agent” subkey under the following: HKLM\SYSTEM\CurrentControlSet\ServicesTo remove the existing version of the SMTPDomainCacheTask, follow these steps: Make a backup copy of SMTPDomainCacheTask.exe.config file from the following folder: %PROGRAM FILES%\Microsoft hosting\Provisioning\SmtpDomainCacheTaskRemove SmtpDomainCacheTask by using Add or Remove Programs.On the OMSQL server, reinstall the following components:ADCollecter.msiOn the MPSSQL server, reinstall the following components: ResourceManageDatabase.msi If current system is upgraded from Hosted Messaging and Collaboration 4.0, follow these steps to install and run CheckFolderGroupsAndRMByPlan.msi.Copy the CheckFolderGroupsAndRMByPlan.msi to a location on the MPS engine server (MPS01).Run the CheckFolderGroupsAndRMByPlan.msi file.Locate the CheckFolderGroupsAndRMByPlan.exe.config file in the following folder: %program files%\Microsoft Hosting\Provisioning\CheckFolderGroupsAndRMByPlanRemove the file’s read-only property, and then edit the file to point to the SQL server location of the ResourceManager and PlanManager databases (MPSSQL01).Open a command prompt, and run the CheckFolderGroupsAndRMByPlan.exe file.Log on to the MPSSQL server as the Domain Administrator, run the KB959196.msi file to install the MPS Resource manager Database Function Update tool..

For File Repair and Data Recovery, visit File Repair / Data Recovery